Model: CAT 3512 Serial No.: CAT00000TZAF00330 Engine Hours: 5839 Last TOH: Dec 13, 2022

Model: CAT 3512 Serial No: CAT03512LYAX00375 Engine Hours: 19354 Note: Unit requires alternator repair or replacement

Custom Build Tier 4 Engines True Twin Pumper Low Engine Hours Highest Compact Quints Available with Required Horsepower

2006 Dragon Frac Pump - Refurbished MTU engine, Refurbished Allison Transmission, rebuilt GD quint powerend, emergency shutdown function, re-built webasto preheater, brand new GD 15000 psi 4" quint stainless steel fluid head. Retrofitted with a complete new hydraulic system and 6x5 mission sandmaster and PrimeWSI frac controls

Custom Build Tier 4 Engines True Twin Pumper Low Engine Hours Highest Compact Quints Available with Required Horsepower

Features • Compact and effective. • Maximum recycling of waste streams. • Ease of Operation. • Cost effective vs. transport and disposal option. • Reduces liquid waste and disposal costs. • Reduces water consumption - by liquid re-cycling. • Highly effective in clear water drilling. Operational Overview Chemically enhanced Centrifugation is the process of removing the majority of colloidal size solids in excess of used water base drilling mud by the addition of chemicals to coagulate and flocculate the solids in the mud thus blended chemically enhanced fluid is pumped to centrifuge. Without chemical enhancement or the dewatering process, the mechanical liquid solids separation capability of a centrifuge is limited to 3-5 microns. Thus dewatering overcomes this limitation by “flocculation” of the feed mud by pre-treating the mud chemically to increase the “effective particle size” of the suspended solids.

Features • Stacked leaves provide a very high surface area • Large surface area and corrugated plate design promotes efficient gas removal • Gas extraction from the side • Large access door • Vertical design decreases footprint • Automatic vacuum and flow rate minimises operator intervention • Easy inspection and maintenance Operational Overview The vacuum degasser uses a series of stacked, corrugated baffle plates and several feed ports to distribute the drilling fluid and encourage high fluid contact and turbulence within a vacuum chamber. A vacuum pump produces a low pressure condition inside the chamber that helps release the gas bubbles from the mud. A jet pump (venturi) draws the de-gassed mud from the bottom of the degasser chamber and discharges into a receiving tank.

BJ VARCO PS-30 TON W/ 5.1/2" SLIP ASSEMBLY

Varco Weldless 750 Ton Link Set

Varco Weldless 1000 Ton Link Set

Varco Weldless 1000 Ton Link Set