Features • Compact and effective. • Maximum recycling of waste streams. • Ease of Operation. • Cost effective vs. transport and disposal option. • Reduces liquid waste and disposal costs. • Reduces water consumption - by liquid re-cycling. • Highly effective in clear water drilling. Operational Overview Chemically enhanced Centrifugation is the process of removing the majority of colloidal size solids in excess of used water base drilling mud by the addition of chemicals to coagulate and flocculate the solids in the mud thus blended chemically enhanced fluid is pumped to centrifuge. Without chemical enhancement or the dewatering process, the mechanical liquid solids separation capability of a centrifuge is limited to 3-5 microns. Thus dewatering overcomes this limitation by “flocculation” of the feed mud by pre-treating the mud chemically to increase the “effective particle size” of the suspended solids.
Features • Upgraded to CE Certification • Sound Attenuated Enclosure • Set control and synchronizing panel • Alarms and shutdowns • Exhaust silencer Operational Overview Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2.
Features • Stacked leaves provide a very high surface area • Large surface area and corrugated plate design promotes efficient gas removal • Gas extraction from the side • Large access door • Vertical design decreases footprint • Automatic vacuum and flow rate minimises operator intervention • Easy inspection and maintenance Operational Overview The vacuum degasser uses a series of stacked, corrugated baffle plates and several feed ports to distribute the drilling fluid and encourage high fluid contact and turbulence within a vacuum chamber. A vacuum pump produces a low pressure condition inside the chamber that helps release the gas bubbles from the mud. A jet pump (venturi) draws the de-gassed mud from the bottom of the degasser chamber and discharges into a receiving tank.
mSAFE SQ2 PLC - UL508A Panel,Shielding in Panel,24vdc Fenner Power Unit,Noshok 621 Inline Sensor,Aluminum D03 Parallel Manifold 2 Station,Selector valve 3-way P blocked, Center A B to T + coils,2-way, 2-stage,solenoid poppet valve,T-13A Sandwich manifold,24VDC high power coil Din A,Alum Tapping Plate,1/4 ORB male to 1/4 NPT female,7in STUDKIT D03,Socket Head Plug, 1/2" ORFS Male,Socket Head Plug, 5/8" ORFS Male,1/2" ORB Male x 1/2" NPTF Male,1/2" FNPT D-Quick Connect,1.5' -- 1/4" 3K MTF,hose end 1/4" JIC - F,1/4" JIC x 5/8" ORB Male,1/4" JIC x 9/16" ORB Male,Std Weather Fittings 3/4 NPT (5 pack),1" NPT liquid tight 90 fitting,Southwire 1" x 50' Liquidtight Flexible Non-Metallic Conduit (8ft),J-box with mounting feet,Cable mangement race way,1/2" 3k Hyd Hose 25' with QC Connectors
PipeMonit® Swarm® S1 EX and CSA Includes standard bracket and 50 cm jumper cable, PipeMonit® Swarm SDL-Ex SDL in a ExD enclosure, can be installed in a Ex zone, PipeMonit® Swarm – Protective Cover For Swarm S1 and Swarm S2 LT sensors