Features • Compact and effective. • Maximum recycling of waste streams. • Ease of Operation. • Cost effective vs. transport and disposal option. • Reduces liquid waste and disposal costs. • Reduces water consumption - by liquid re-cycling. • Highly effective in clear water drilling. Operational Overview Chemically enhanced Centrifugation is the process of removing the majority of colloidal size solids in excess of used water base drilling mud by the addition of chemicals to coagulate and flocculate the solids in the mud thus blended chemically enhanced fluid is pumped to centrifuge. Without chemical enhancement or the dewatering process, the mechanical liquid solids separation capability of a centrifuge is limited to 3-5 microns. Thus dewatering overcomes this limitation by “flocculation” of the feed mud by pre-treating the mud chemically to increase the “effective particle size” of the suspended solids.
Flare Stack Package- Stock Equipment , New –unused consisting of the main following equipment items: Description 26" Equivalent Diameter Air Assisted Flare Tip (316SS / A-105N) EPF-08-0-FL-01 Qty 1 Air-Assist Flare Burner Blower / Motor Skid Unit. EPF -08-0-K-01-A/B 2 Flare Ignition Control Panel (120VAC / Hazardous Area) EPF-08-0-A-01 1 Flareon Energy Efficient Pilots (310SS/316SS). 3 Flareon High Energy Pilot Ignitors (10,000V AC). 3 Flareon Single Element Pilot Flame Proving Thermocouples (310SS). 3 46.3 meter Guy # Supported Flare Stack (CS). 1 Maintenance Platform, Four (4) Rest Platforms and five (5) Caged Ladders (max 9m). 1 Set of Flare Stack Mineral Insulated Power / Thermocouple Cable (50m). 1 Set of Standard Power / Thermocouple Cable (60m). 1 One (1) Set of Pilot Fuel Gas, Manual Flame Front Generator and Manual Fuel Gas Back-up 1 Instrumentation One (1) ICP / Instrumentation Skid (CS). 1
Stock Equipment : New, unused Quantity : 1 off Service : Closed Drain Vessel (EPF-07-1-V-01) Type : Horizontal Size : 83” ID x 35’ T/T Design Pressure : FV/150 psig Design Temperature : 350 degF Design Code : ASME VIII Div. 1 U Stamp + NACE Corrosion Allowance : 3.0 mm Internal Lining : No External Painting : Vendor Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell & Heads : SA 516 GR 70 MOC – Internals : NA
Stock Equipment : New, unused Quantity : 1 off Service : Fuel Gas Conditioning Skid Equipment : 1 off Fuel Gas Scrubber Type : Vertical Size : 18” OD x 8’ FOF/T Design Pressure : FV/210 psig Design Temperature : 200 degF Design Code : ASME VIII Div. 1 U Stamp Corrosion Allowance : 3.0 mm Internal Lining : No External Painting : Expro Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell : SA 516 GR 70 MOC – Internals : SS 316L demister Equipment : 1 off Fuel Gas Heater Type : 20kW, 480V, 3Ph, 3 wire delta, 60Hz, Single Stage Size : 4” NB ID x 4’-7” Bundle Length Design Pressure : FV/210 psig Design Temperature : 200 degF Design Code : ASME VIII Div. 1 Certification : Ex II 2G, Exe IIC T3 Gb. Corrosion Allowance : 3.0 mm External Painting : Expro Standard 3 Coat Epoxy Paint ISO 15156/MR0175 : Yes MOC – Shell : ASTM A106-B MOC – Internals : Tubesheet ASTMA105-N Baffle SS 316L
Stock Equipment : New, unused FIT skid as per P&ID Quantity : 1 off Service : FIT EPF-01-1-FIT-030321 Turbine Flowmeter : Cameron, NUFLO Liquid Turbine Flowmeter Nominal Flow Range : 8,600 – 86,000 BPD Design Pressure : 1300 psig Design Temperature : 200 degF Meter Nozzle sizes : 6” ANSI mates any ANSI RF up to 1500# Piping Nozzle sizes : 8” ANSI 600# RF inlet and outlet MOC - Body : SS 316L MOC – Rotor : CD-4MC-Cu (Ni Plated) MOC – Flanges : ASTM A105 Flow Totalizer : Fluidwell, E018-P-CR-HA-IB-OT-PD-XD-ZX Hazardous Area : Class I, Div. 2 Certification : Exd, IP67
Stock Equipment : New, unused pump manifold skid as per P&ID Quantity : 1 off (4 skids) Service : Crude Export Pumps Manifold Skid complemented with pumps suction and discharge instrumentation and PSVs. Size : Pump Manifold 20” suction and 12” discharge sized for 100,000 BPL. All other pipework sized for 38,000 BPD Nozzle sizes : 20” ANSI 150# RF inlet and 12” ANSI 600# RF outlet Instrument Hazardous Area : Class I, Div. 2